---

hello,

i'm trying to find some information regarding the following papers in terms of Platen Gap settings for the Epson SC-P900:

(these three are all the same thickness @22.5mil/0.5715mm)
Entrada Rag Natural 300
Entrada Rag Bright 300
Entrada Rag Textured 300

(11mil/0.2794mm)
Entrada Lasal Photo 235

(unknown thickness)
Artist Cards

i've already adjusted the paper thicknesses for each profile in the Epson Media Installer, but cannot find any information if the default media setting's platen gap measurements should be adjusted for the specific thicknesses of each papers per profile.

any information or suggestions would be greatly appreciated.

thank you!

---

For the 300gsm papers I generally use a platen gap of 1.6
For the Lasal Photo Matte and Artist Cards you should be able to use the default height for the media setting.